Touch Control; Keyboard Control - Siemens SIMATIC TP 270 Operating Instructions Manual

Operator control Function
element
Synchronizes the values of the recipe record currently displayed in the recipe view with the
associated tags.
During synchronization, all values of the recipe record are written to the associated tags. Then the
values are read from the tags and used to update the values in the recipe view.
Transfers the recipe record currently displayed in the recipe view, to the connected PLC.
Transfers the recipe record currently loaded in the PLC, to the HMI device and displays it in the recipe
view.
9.2.9.2

Touch control

Procedure
Touch the desired operating element in the recipe view on the touchscreen of the HMI
device.
Use the screen keyboard to enter values.
9.2.9.3

Keyboard control

Procedure
Activate the recipe view using
The table below shows the shortcut keys used to control the recipe view.
Shortcut keys
CTRL
CTRL
CTRL
CTRL
TP 270, OP 270, MP 270B (WinCC flexible)
Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0
Function
Creates a new recipe record in the recipe displayed in the specified recipe view.
+
The recipe record values are preset with the values that were specified as
"Default value" when the recipe was configured.
Saves the recipe data record currently displayed in the recipe view. The storage
+
ENTER
location is determined during configuration in the recipe properties view.
Saves the recipe record currently displayed in the recipe view under a new
*
+
name. The storage location is determined during configuration in the recipe
properties view.
Deletes the recipe record displayed in the recipe view from the data medium of
INS
+
DEL
the HMI device.
, according to the configured Tab order.
TAB
Operate project
9.2 Controlling graphic objects
9-33