Touch Control; Keyboard Control - Siemens SIMATIC TP 270 Operating Instructions Manual

Layout
If the slider control is used as a display object, the represented value is determined by the
position and configuration of the movable slide.
9.2.13.2

Touch control

Procedure
Touch the slider on the touch screen of the HMI device. Move the slider in the desired
direction while keeping contact with the screen.
9.2.13.3

Keyboard control

Procedure
One way to operate the slider control with a keyboard is to use the cursor keys
The following table lists the key combinations for controlling the slider control.
Keys
SHIFT
SHIFT
SHIFT
SHIFT
HOME
END
F N
F N
TP 270, OP 270, MP 270B (WinCC flexible)
Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0
Meaning
Increase value
+
+
Reduce value
+
+
Increase value in 5% increments
Move to maximum/minimum value
+
HOME
+
END
Operate project
9.2 Controlling graphic objects
9-43