Table of Contents
Advertisement
17.2.1
Installing the Control Panel Interface
A Touch Panel can accommodate either a control panel interface or a direct
key module (see section 17.1.1). Use the following procedure to install a con-
trol panel interface:
Caution
!
1. Place the front panel of the Touch Panel on a workbench.
2. Release the two pop rivets
Figure 17-5 Removing the cover (example TP37)
TP27, TP37 Equipment Manual
Release 01/00
Make sure that the Touch Panel is disconnected from the voltage supply.
Always follow the ESD guidelines in the Appendix when working on open
devices.
in an example of the TP37, from the rear panel of the Touch Panel.
·
and then the cover · indicated in figure 17-5
Options
17-7
Advertisement
Table of Contents
