Keyboard Control; Mouse And Keyboard Control - Siemens SIMATIC TP 270 Operating Instructions Manual

9.2.7.3

Keyboard control

Procedure
There is also a tab order in the alarm view for the list showing displayed alarms and all
configured buttons.
Proceed as follows to acknowledge an alarm using the keys.
1. Activate the alarm view using
2. Select the alarm to be acknowledged. The
3. Press and hold the
4. Press the
9.2.7.4

Mouse and keyboard control

Procedure
Mouse
Click on the desired operating element or list entry.
Changing column sequence and sorting sequence
In Runtime you can configure the column order and the sorting order of each column.
• Change column sequence
• Change sorting order
Keyboard
The alarm view also has a tab sequence for the list which shows displayed and all
configured buttons.
Do the following to acknowledge an alarm using the keyboard.
1. Activate the screen display with <Tab> according to the tab sequence.
2. Select the alarm to be acknowledged. You can use the keys <Home>, <End>, <Page
TP 270, OP 270, MP 270B (WinCC flexible)
Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0
for this.
TAB
key.
ENTER
For example, to reverse the "Time" and "Date" columns, drag the "Date" header to the
"Time" header with the mouse.
To change the chronological sorting order of the alarms, click on the header of one of the
two "Time" or "Date" columns.
Up>, <Page Down>, <Up> and <Down> for this.
, according to the tab order.
TAB
HOME
key until the button to be acknowledged is selected.
9.2 Controlling graphic objects
, , and keys can be used
END
Operate project
9-29