Functions Of The Key Combinations - Siemens SIMATIC TP 270 Operating Instructions Manual

Operate project
9.1 Basic principles of operation
Key Function
Moving the cursor
Scrolling back
HOME
Scrolling up
END
Shift
(upper/lower case)
SHIFT
Shift (special character)
F N
General control functions
CTRL
General control functions
ALT
9.1.3.2

Functions of the key combinations

General operation
Navigation
Shortcut keys
SHIFT + TAB
SHIFT +
SHIFT +
+
SHIFT
SHIFT +
F N
+
HOME
9-12
Function
Selects the previously available screen object in the configured tab sequence.
Positions the cursor within a screen object, for example, in an I/O field.
Jumps to the start of the selection list.
Purpose
Selects the next operable screen object on the right or left,
•
above or below the current screen object.
Navigates in the screen object.
•
Scrolls one page down.
Scrolls one page up.
Use in key combinations, for example, for switching to
uppercase letters.
Use in key combinations for the input of special characters.
Some of the keys contain a blue special character on their
bottom left corners, e.g. the "%" character. In order to input
these characters, press the relevant key in combination with
the special character key shown on the left.
Used in key combinations, for example, for navigating through
trend views.
Used in key combinations, for example, for the "Status force"
screen object.
TP 270, OP 270, MP 270B (WinCC flexible)
Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0