Touch Control; Keyboard Control; Mouse And Keyboard Control - Siemens SIMATIC TP 270 Operating Instructions Manual

9.2.8.2

Touch control

Procedure
Touch the desired operating element in the alarm view on the touchscreen of the HMI
device.
9.2.8.3

Keyboard control

Procedure
The simple alarm view also has a tab order for the list showing displayed alarms and all
configured buttons.
Proceed as follows to acknowledge an alarm using the keys.
1. Activate the simple alarm view using
2. Select the alarm to be acknowledged. The
3. Press and hold the
4. Press the
9.2.8.4

Mouse and keyboard control

Procedure
Mouse
Click the relevant button.
Keyboard
The alarm view also has a tab sequence for the list which shows displayed and all
configured buttons.
Do the following to acknowledge an alarm using the keyboard.
1. Activate the screen display with <Tab> according to the tab sequence.
2. Select the alarm to be acknowledged. You can use the keys <Home>, <End>, <Page
3. Hold the <Tab> key pressed until the button to be acknowledged is selected.
4. Press the <Return> button.
TP 270, OP 270, MP 270B (WinCC flexible)
Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0
for this.
TAB
key.
ENTER
Up>, <Page Down>, <Up> and <Down> for this.
, according to the tab order.
TAB
HOME
key until the button to be acknowledged is selected.
9.2 Controlling graphic objects
, , and keys can be used
END
Operate project
9-31