Yamaha 2004 WR250FS Owner's Service Manual page 285

SWINGARM
2. Install:
• Bearing 1
• Oil seal 2
To relay arm.
NOTE:
• Apply the molybdenum disulfide grease on
the bearing when installing.
• Install the bearing by pressing it on the side
having the manufacture's marks or numbers.
Installed depth of bearings a:
5 mm (0.20 in)
3. Install:
• Bearing 1
• Oil seal 2
To connecting rod.
NOTE:
• Apply the molybdenum disulfide grease on
the bearing when installing.
• Install the bearing by pressing it on the side
having the manufacture's marks or numbers.
Installed depth of bearings a:
5 mm (0.20 in)
Swingarm
1. Install:
• Bushing 1
• Thrust bearing 2
• Oil seal 3
• Collar 4
To swingarm 5.
NOTE:
Apply the molybdenum disulfide grease on the
bushings, thrust bearings and oil seal lips.
2. Install:
• Collar 1
To relay arm 2.
NOTE:
Apply the molybdenum disulfide grease on the
collars and oil seal lips.
5 - 57
CHAS