Yamaha 2004 WR250FS Owner's Service Manual page 129

3
1
4
2
4 - 7
RADIATOR
3. Install:
• Right radiator 1
• Bolt (right radiator) 2
10 Nm (1.0 m · kg, 7.2 ft · lb)
• Radiator hose 3 3
Refer to "CABLE ROUTING DIAGRAM"
section in the CHAPTER 2.
4. Install:
• Left radiator 1
• Bolt (left radiator) 2
10 Nm (1.0 m · kg, 7.2 ft · lb)
• Radiator hose 1 3
2 Nm (0.2 m · kg, 1.4 ft · lb)
Refer to "CABLE ROUTING DIAGRAM"
section in the CHAPTER 2.
5. Tighten:
• Radiator hose clamp 4
2 Nm (0.2 m · kg, 1.4 ft · lb)
6. Install:
• Radiator guard 1
• Bolt (radiator guard) 2
10 Nm (1.0 m · kg, 7.2 ft · lb)
NOTE:
Fit the hook a on the inner side first into the
radiator.
7. Install:
• Coolant reservoir 1
• Bolt (coolant reservoir) 2
7 Nm (0.7 m · kg, 5.1 ft · lb)
• Coolant reservoir hose 3
• Coolant reservoir breather hose 4
Refer to "CABLE ROUTING DIAGRAM"
section in the CHAPTER 2.
8. Fill:
• Radiator
• Engine
• Coolant reservoir
Refer to "COOLANT REPLACEMENT"
section in the CHAPTER 3.
ENG