Yamaha 2004 WR250FS Owner's Service Manual page 142

1
1
3. Install:
4. Tighten:
5. Install:
2
6. Adjust:
1
7. Install:
2
8. Install:
4 - 20
CARBURETOR
• Hot starter plunger 1
2 Nm (0.2 m · kg, 1.4 ft · lb)
• Screw (air filter joint) 1
3 Nm (0.3 m · kg, 2.2 ft · lb)
• Screw (carburetor joint) 2
3 Nm (0.3 m · kg, 2.2 ft · lb)
• Throttle cable (pull) 1
4 Nm (0.4 m · kg, 2.9 ft · lb)
• Throttle cable (return) 2
11 Nm (1.1 m · kg, 8.0 ft · lb)
• Throttle grip free play
Refer to "THROTTLE CABLE ADJUST-
MENT" section in the CHAPTER 3.
• Throttle cable cover 1
• Screw (throttle cable cover) 2
4 Nm (0.4 m · kg, 2.9 ft · lb)
• Throttle position sensor lead coupler 1
• Clamp 2
Refer to "CABLE ROUTING DIAGRAM"
section in the CHAPTER 2.
ENG