Yamaha 2004 WR250FS Owner's Service Manual page 205

AC MAGNETO AND STARTER CLUTCH
a
2
1
2
1
EC4L5000
ASSEMBLY AND INSTALLATION
AC magneto and starter clutch
1. Install:
• Stator 1
• Bolt (stator) 2
• Pickup coil 3
• Bolt (pickup coil) 4
2. Install:
• Holder 1
• Bolt 2
CAUTION:
Pass the pickup coil lead and charging coil
lead under the holder while taking care not
to allow these leads to get caught with each
other. Also take care to pass the leads so
that they do not become loose at the bend
of the holder a in order to avoid their con-
tacting the starter clutch drive gear.
NOTE:
Apply the sealant to the grommet of the AC
magneto lead.
3. Install:
• Idle gear 2 1
• Dowel pin 2
1
NOTE:
2 Apply the engine oil on the idle gear 2.
E
4. Install:
• Idle gear plate 1
• Bolt (idle gear plate) 2
2
4 - 83
ENG
7 Nm (0.7 m · kg, 5.1 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)
®
Quick gasket :
ACC-QUICK-GS-KT
YAMAHA Bond No. 1215:
90890-85505
10 Nm (1.0 m · kg, 7.2 ft · lb)