Yamaha 2004 WR250FS Owner's Service Manual page 203

AC MAGNETO AND STARTER CLUTCH
1
1
2
1
a
a
4 - 81
EC4L3000
REMOVAL POINTS
Rotor
1. Remove:
• Nut (rotor) 1
• Washer
Use the sheave holder 2.
Sheave holder:
YS-1880-A/90890-01701
2. Remove:
• Rotor 1
Use the rotor puller 2.
Rotor puller:
YM-04141/90890-04141
Starter clutch
1. Remove:
• Starter clutch assembly cover 1
NOTE:
Insert a thin screwdriver or the like under the
convexity a and remove the starter clutch
assembly cover by prying it gently to void dam-
age to the cover.
2. Remove:
• Starter clutch 1
NOTE:
Using a thin screwdriver or the like, remove the
plate a while prying it upward little by little.
EC4L4000
INSPECTION
AC magneto
1. Inspect:
• Rotor inner surface a
• Stator outer surface b
Damage → Inspect the crankshaft runout
and crankshaft bearing.
If necessary, replace AC magneto and/or
stator.
ENG