Yamaha 2004 WR250FS Owner's Service Manual page 212

ENGINE REMOVAL
EC4M5000
ASSEMBLY AND INSTALLATION
Engine installation
1. Install:
• Engine 1
Install the engine from right side.
• Pivot shaft 2
• Engine mounting bolt (lower) 3
• Lower engine bracket 4
• Bolt (engine bracket) 5
• Engine mounting bolt (front) 6
• Upper engine bracket 7
• Engine mounting bolt (upper) 8
• Bolt (left engine guard) 9
• Lower engine guard 0
• Bolt (lower engine guard) A
NOTE:
Apply the molybdenum disulfide grease on the
pivot shaft.
EC4M5211
Brake pedal
1. Install:
• Spring 1
• Brake pedal 2
• O-ring 3
New
• Bolt (brake pedal) 4
• Clip 5
NOTE:
• Apply the lithium soap base grease on the
bolt, O-rings and brake pedal bracket.
• Install the clip with its stopper portion a fac-
ing inward.
4 - 90
ENG
85 Nm (8.5 m · kg, 61 ft · lb)
69 Nm (6.9 m · kg, 50 ft · lb)
34 Nm (3.4 m · kg, 24 ft · lb)
69 Nm (6.9 m · kg, 50 ft · lb)
55 Nm (5.5 m · kg, 40 ft · lb)
23 Nm (2.3 m · kg, 17 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)
26 Nm (2.6 m · kg, 19 ft · lb)