Yamaha 2004 WR250FS Owner's Service Manual page 271

HANDLEBAR
4. Install:
• Grip cap cover 1
• Throttle grip 2
NOTE:
Apply the lithium soap base grease on the
throttle grip sliding surface.
5. Install:
• Throttle cables 1
To tube guide 2.
NOTE:
Apply the lithium soap base grease on the
throttle cable end and tube guide cable wind-
ing portion.
6. Install:
• Throttle cable cap 1
• Screw (throttle cable cap) 2
WARNING
After tightening the screws, check that the
throttle grip 3 moves smoothly. If it does
not, retighten the bolts for adjustment.
7. Install:
• Grip cap cover 1
• Cover (throttle cable cap) 2
5 - 43
CHAS
4 Nm (0.4 m · kg, 2.9 ft · lb)