Minolta Di200 User Manual page 42

Hide thumbs Also See for Di200:
Table of Contents

Advertisement

2-22
6. Auxiliary Functions
Auto Panel Reset
If no key on the control panel is pressed within 1
min after a copy cycle has been completed or
copying settings made, the Auto Panel Reset
function is activated to return the machine to the
default settings.
Useful Tip
The time for the machine to activate Auto Panel
Reset Function can be selected. The Auto Panel
Reset function can even be disabled. For details,
see "User's Choice."
Energy Save Mode
To save electricty, the machine enters the Energy
Save Mode a given period of time after the last
activity. The initial setting is 15 min.
To cancel the Energy Save Mode, press any key on
the control panel or raise the Original Cover or
place an original on the document feeder.
Useful Tip
The time for the machine to enter the Energy
Save Mode can be selected from 1 min to 240
min. For details, see "User's Choice." p.4-6
Auto Shut OFF
<Only when a Printer Controller is not mounted>
To save electricity, the Auto Shut OFF function
shuts down the machine a given period of time
after the machine has been used last.
The initial setting is 30 min.
Useful Tip
The time for the machine to enter the Auto Shut
OFF mode can be selected from 15 min to 240
min. The Auto Shut OFF can even be disabled.
For details, see "User's Choice." p.4-6
p.4-6
Sleep
<Only when a Printer Controller is mounted>
To save electricity, the machine automatically
enters the Sleep mode a given period of time after
the last activity. Sleep saves more electricity, but
takes longer to be activated, than Energy Save.
The initial setting is 30 min.
To cancel the Sleep mode, press any key on the
control panel, raise the Original Cover, or place an
original in the document feeder.
Useful Tip
The time for the machine to enter the Sleep mode
can be selected from among 15 min to 240 min.
The Sleep can even be disabled. For details, see
"User's Choice." p.4-6
LCD Back-light Off
To save electricity, the machine enters the LCD
Back-light OFF function a given period of time
after the last activity. The initial setting is 1 min.
To cencel the LCD Back-light OFF function, press
any key on the control panel or raise the Original
Cover or place an origianl on the document feeder.
Useful Tip
The time for the machine to enter the LCD Back-
light OFF function can be selected from 1 min to
240 min. For details, see "User's Choice."
p.4-6
Job List
You can check for operation data and present
conditions on the Touch Panel.
p.3-41

Advertisement

Table of Contents
loading

Table of Contents