Minolta Di200 User Manual page 70

3-26
5. Selecting the Original
[Margin] key for the original:
When you're going to make copies using Single-
Sided Double-Sided or Double-Sided
Sided, first check to see if your original has a file
margin in it. The machine can correct the margin
position to make good copies.
Original with
a File Margin
If your original has a file margin
1
Touch [Margin].
2
Select the desired margin position.
You have a choice of the following two
Margin Positions.
Margin Position (Left)
Orig.
Margin Position (Top)
Orig.
Copy Type
Single-
Original with no
File Margin
1155O735AA
4012P309CA
Copy
1155O635AA
Copy
1155O636AA
3
Hold down [ ] or [ ]until the desired
margin width is reached.
Useful Tip
You can change the margin width in 1-mm
increments within the range 0mm to 20mm.
4
Touch [Enter].
NOTE
The [Margin] key is invalid when the Automatic
Document Feeder is used.
Useful Tips
• If the margin position is set to Left, the image
on both the first and second sides of the copy
will have the same orientation as that on the
original.
Orig.
• If the margin position is set to Top, the image on
the second side of the copy will be inverted to
that on the first side.
Orig.
If your original has no file margin
It's not necessary to correct the margin position
and width if your original has no file margin.
4012P046DB
Copy
4002O013AB
Copy
4002O048AB