Minolta Di200 User Manual page 111

Programming the Access Code
An access code can be programmed when "100 Accounts 1" is selected.
1
To display [Copy Track] on the Touch Panel,
follow the steps given in "Setting Admin.
Management." p.4-18
2
Touch [Copy Track].
3
Touch [Copy Track Data].
4
Select the page number on which the target
account is shown.
5
Touch the [Access Code] key of the target
account.
6
Enter the access code from the 10-Key Pad.
Touch [Enter].
4012P150CC
4012P154CB
NOTES
• The access code should be a 4-digit number.
• If a new access code is programmed, the old
one will be erased.
• If a new access code entered already exists for
another account, the entry will be rejected.
Enter a different access code.
Useful Tips
• If you have entered an incorrect number, press
the Clear key, then enter the correct number.
• If you want to program an access code for
another account, repeat steps 4 through 6.
4012P155DC
7
Touch [Exit].
6. Settings in Admin. Management
4012P157CB
1166O030AA
4-25