Honeywell IAQPoint2 User Manual page 1344

Using the IAQPoint
Programming Menus
Setting the CO
This option allows you to set the value for the desired
option is used when the IAQPoint is connected to an external system that
can manage and maintain desired
• Scroll to the
• Use the Up or Down buttons to increase or decrease the value to the
desired level and press Enter to confirm.
The screen returns to the main menu option.
Setting the Temperature Scale
This option allows you to set the unit of measurement to Celsius or
Farenheit. The selected scale will be used by the Temperature Setpoint
function and by certain network interfaces.
• Scroll to the Temp Set Scale menu and press Enter to select.
• Use the Up or Down buttons to display either Celsius or Farenheit
press Enter to confirm.
The screen returns to the main menu option.
28
Setpoint
2
Setpoint menu and press Enter to select.
CO
2
Temp Set Scale
Temp Set Scale
IAQPoint User Manual
levels.
CO
2
* Menu *
CO Setpoint
2
CO2 Setpoint
850
* Menu *
celsius
level. This
CO
2