Honeywell IAQPoint2 User Manual page 1340

Using the IAQPoint
Programming Menus
Starting the LON Service
This option is only available if the communication type ("Set Comm IF"
menu) for the device is LonTalk. Selecting the Exec LON Serv. sends a
Service Pin Message (a unique serial number) to the LonTalk network
identifying the new device.
• Scroll to the Exec LON Serv. screen and press Enter to select.
The Service pin message is sent to the LonTalk network and the screen
displays a confirmation.
When the device is factory programmed with the LON service, the left
hand LED will be off.
24
Exec LON Serv.
Exec LON Serv.
See the LON Objects Description in Annex A for details.
IAQPoint User Manual
* Menu *
Req. accepted