Honeywell IAQPoint2 User Manual page 1336

Using the IAQPoint
Programming Menus
Configuring the IAQPoint
Although the IAQPoint is shipped with default settings, these may be
changed on-site to suit your needs.The main programming menu
provides access to various options.
Selecting the Communication Type
The IAQPoint is shipped with the communication type pre-configured
according to customer specifications. If a change is required, the Set
Comm IF menu allows you to change the communication type.
• From the main "Set Comm IF" screen, press Enter to select.
• In the "Set Comm IF" screen, use the Up or Down buttons to scroll
through the options (No Interface, Modbus, Modbus DM3, LonTalk or
BACnet).
• When the desired option is displayed, press Enter to select.
• The screen returns to the main menu options.
20
* Menu *
Set Comm. IF
Set Comm IF
Modbus
IAQPoint User Manual