Honeywell IAQPoint2 User Manual page 1558

The third event screen lets users specify the actions linked to the event.
The screen displays REL #1 (the default value).
• Press enter to enable the field and use the arrows to scroll through
the options:
REL #1: (through REL #4)Triggers the devices connected to the
selected relay
OUT #1: (through OUT #3)Triggers the devices connected to the
selected Output
BUZZER: Triggers the audible alarm for this event
---: Displays the EraseALL screen. When "Yes?" is
selected from the Event #1 menu, all configuration
data for events will be erased.
Note that when "---" is selected at any other event number, the
EraseALL screen does not appear and the data for the active
event number will be erased (and events will change numbers,
moving up one).
When you have selected the option and pressed enter, the field is
disabled and you can proceed to the next screen. Use the arrows to
move ahead one screen.
The final screen, RESET, lets users specify that an event will remain
active, even after it has returned to normal.
• Press enter to enable the field and use the arrows to scroll to Y?.
• Press enter once again to activate the Reset function.
Note: The Reset key on the front panel lets you deactivate the event
301EM User Manual
Programming and Calibration
Using the SetEvent Menu
39