Honeywell IAQPoint2 User Manual page 972

The bottom left portion contains the logic, or operator, quantifier that
determines how conditions are calculated. Options available in this field
are:
Operator
Symbol
--- No operator
= Equal to
<= Equal to or smaller than
< Smaller than
>= Equal to or larger than
> Larger than
!= Not equal to
When the maximum value is reached, an action is triggered. It
max
will not be deactivated until levels fall below minimum value
When concentrations fall below minimum value, an action is
min triggered. It will not be deactivated until concentrations rise
above set maximum value
The top right portion contains the source, which defines what device or
group of devices the Event will be based on. The list provides the
following options:
GrAll: Includes all transmitters (see note)
Gr_ _ _: Includes only the devices in the specified group (see note)
Tx000: Includes only the specified transmitter (connected to the con-
troller)
Clock: Includes only information gathered between the specified
times. Selecting clock sets a condition that is applied only
between the start and end time frame. It is possible to set
one condition screen to specific parameters and the second
to clock, which means that the specified condition will trigger
an event only if it occurs during the set time period.
Note: Clicking on the magnifying glass to the right of a Group number
on the display opens a view of the Group for consultation or
editing. Press Esc to close the group view and return to the
Event condition screen.
M-511401
8/10
Meaning
96d User Manual
Honeywell
System Programming
Event Menu
45