Selecting Illuminant 2; Selecting The Observer - Konica Minolta CM-2600d Instruction Manual

Selecting Illuminant 2

5
As explained in "Selecting Illuminant 1", select the desired illuminant, then press
A.
<Settings>
• Same as those given in "Selecting Illuminant 1"
• To display MI (metamerism index), an illuminant must be selected for ILLUMINANT 2.

Selecting the Observer

6
Turn B to select the desired observer angle, then press A.
<Settings>
• 10°: 10° observer (CIE1964)
• 2°: 2° observer (CIE1931)
Setting a Measurement Condition
E-37