Specifications - Konica Minolta CM-2600d Instruction Manual

Specifications

Specifications
Model
Illuminating/viewing system
Size of integrating sphere
Detector
Spectral separation device
Wavelength range
Wavelength pitch
Half bandwidth
Reflectance range
Light sources
Measurement time
Minimum measurement inter-
val
Battery performance
Measurement/illumination
area
Repeatability
Inter instrument agreement
UV adjustment
Language modes
Measurement mode
Interface
Observer
Observation illuminant
E-118
CM-2600d
d/8 (diffused illumination, 8-degree viewing angle), equipped with
simultaneous measurement (not switched mechanically) of SCI
(specular component included)/SCE (specular component exclud-
ed). (Conforms to CIE No.15, ISO 7724/1, ASTM E1164, DIN 5033
Tei17, JIS Z8722 Condition c, standard.)
ø52 mm
Silicon photodiode array (dual 40 elements)
Diffraction grating
360 nm to 740 nm
10 nm
Approx. 10 nm
0 to 175%, Display resolution: 0.01%
3 pulsed xenon lamps
Approx. 1.5 seconds (approx. 2
seconds for fluorescent measure-
ment)
3 seconds for SCI/SCE (4 sec-
onds for fluorescent measure-
ment)
Approx. 1000 times at 10-second intervals
(when alkaline batteries used; at 23°C)
MAV: ø8 mm/ø11 mm
SAV: ø3 mm/ø6 mm
(Selectable between MAV and
SAV)
Spectral Reflectance: Standard deviation within 0.1% (360 to 380
nm: Standard deviation within 0.2%)
Chromaticity Value: Standard deviation
a White Calibration Plate is measured 30 times at 10-second inter-
vals after white calibration)
E*ab within 0.2 (MAV/SCI) (Averaged for 12 BCRA Series II
color tiles compared to values measured with master body; at 23°C)
Instantaneous numerical adjust-
ment (no mechanical adjustment
required)
* With UV400 nm cut filter
English/Japanese/German/French/Spanish/Italian
Single/averaging (auto mode: 3, 5, 8 times/manual mode)
Conforms to RS-232C
2/10 degrees
A, C, D , D , F2, F6, F7, F8, F10, F11, F12 (simultaneous evalua-
50 65
tion is possible using two light sources)
CM-2500d
2 pulsed xenon lamps
Approx. 1.5 seconds
3 seconds for SCI/SCE
MAV:ø8 mm/ø11 mm
E*ab within 0.04 (When
No UV adjustment function for
CM-2500d