Connection With The Remote (External) Switches - Panasonic WJ-FS316 Operating Instructions Manual

Connection with the Remote (External) Switches

The Video Multiplexer can be remote controlled if external switches (locally procured) are connected to the ALARM/REMOTE
connector. Remote switches, except SEQUENCE, are grouped under Remote SW1 and SW2. For more information refer to the
pin assignment tables on page 27.
Remote SW1
Notes:
• Switch 10 through 16 are applicable only to WJ-FS316/FS416.
• Make sure that the Function switch 1 is grounded and Function switch 2 is open.
Remote SW2
Note: Make sure that Function switch 1 and 2 are grounded.
29
Function 2 Function 1
Open
GND
or +5V
22 5
16 15
Function 2 Function 1
GND GND
22 5
14 13 12 11 10 9 8 7 6 5
Camera Selection
5
GND
GND
Switch
4 3 2 1
GND
GND
GND
Switch
4 3 2 1
GND