Multi-Station Transmission (Broadcasting) - Panasonic UF-890/990 Operating Instructions Manual

Memory Transmission

Multi-Station Transmission (Broadcasting)

If you have to send the same document(s) to multiple stations, you can save time in feeding the
document(s) by using memory transmission. That is, you can store the document(s) into memory and then
send it to the station(s) automatically.
1
2
MEMORY
Make sure that the MEMORY lamp is on.
If not, press "On".
3
Dial by any combination of the following methods:
• One-Touch Dialing
• Abbreviated Dialing
• Manual Number Dialing, press
station is entered
(UF-990: Up to 70 stations, UF-890: Up to 32 stations)
• Directory Search Dialing, press
station is entered
(For details, see page 47 to 50.)
Ex:
01
ABBR
If you want to confirm the number of stations you have
entered, press
4
START
The document is stored into memory with a file number.
Then starts dialing the telephone numbers in sequence.
1. You can review the stations you entered in step 3 before storing your document into memory
NOTE
by pressing
display if needed.
2. The "Quick Memory Transmission" is disabled if multiple stations are set.
Set document(s) face down.
to set "On".
MEMORY
0 1 0
.
SET
or . Press
Sending Documents
ENTER STATION(S)
THEN PRESS START 00%
after each
SET
<01>(Station name)
after each
SET
5551234
[010](Station name)
5553456
ADD MORE OR START
* STORE *
* STORE * COMPLETED
TOTAL PAGE=005
* DIALING *
(Station name)
to clear an entered station or group shown on the
CLEAR
2 STN(S) ARE SET
NO.001
PAGES=001 01%
25%
NO.001
51