Setting Your Logo - Panasonic UF-890/990 Operating Instructions Manual

Setting Your LOGO

When you send a document, your LOGO appears on the top of the copy printed out at the other station.
The LOGO helps to identify you to someone who receives your document.
1
FUNCTION
2
1
3
SET
repeatedly until display shows;
4
Enter your LOGO (max. 25 characters and digits) by using
the Character keys.
Ex:
P A N A S O N I C
If you make a mistake, use
one space beyond the incorrect character, press
then re-enter the new character.
If more than 19 characters are entered, the left side
characters will scroll off the display.
5
SET
1. Your Company Name or your name must be set as your LOGO because it is required by the
NOTE
Telephone Consumer Act of 1991. (For details, see FCC NOTICE at the end of this Operating
Instructions)
7
or
STOP
User Parameters
SET MODE
ENTER NO. OR
1:USER PARAMETERS?
PRESS SET TO SELECT
LOGO
❚
LOGO
PANASONIC❚
to move the cursor
CLEAR
(1-6)
∨ ∧
27