Panasonic UF-890/990 Operating Instructions Manual page 15

CONTRAST
Used to set Normal, Lighter, or Darker.
(See page 42)
RESOLUTION Used to set Standard, Fine, Super-Fine.
(See page 42)
HALFTONE
Provides OFF, QUALITY or FAST settings
for halftone documents. (See page 43)
MEMORY
Used to select either memory or direct
communication.
(See page 45 to 51)
PAUSE
Used to enter a pause when recording or
REDIAL
dialing a telephone number, or to redial
the last dialed number. (See page 60)
Used to start Abbreviated Dialing.
ABBR
(See page 49 and 53)
SUB-ADDR
Used to separate the Sub-address from
FLASH
the telephone number when dialing, or to
access some features of your PBX.
FUNCTION
Used to start or select the function and
sub-functions.
These functions are explained in detail on
page 12.
ABC DEF Used for manual number dialing,
1 2 3
recording phone numbers, and numerical
GHI JKL MNO
4 5 6 entries.
PRS TUV WXY
7 8 9
TONE OPER
0
Used to temporarily change the Dialing
TONE
Mode to Tone when Pulse mode is set.
+
Used for the following:
• Adjust the monitor and ringer volume.
VOLUME
(See page 25)
• Move the cursor while entering numbers and
characters.
-
• Search the station name for Directory Search
Dialing.
• Confirm the entered station for multi-station
communication.
• Select functions.
• Confirm the current communication modes
(e.g. Page number, ID, Dialed Telephone
number, File number) when the unit is ON
LINE.
STAMP
Used to turn the verification stamp ON or
OFF. (See page 43)
DIRECTORY
Used to search for a station name.
SEARCH
(See page 50 and 54)
CLEAR
Used to erase the previously entered input.
SET
Used to set operations.
Used to select the communication port.
LINE
Available for UF-990 only if the Optional G3
SELECT
Communication Port Kit has been installed.
(See page 156)
Used to start On-Hook Dialing. (See page 56)
MONITOR
Used to cancel operations. When it is pressed,
STOP
the machine will return to standby.
Used to make copies.
COPY
(See page 65)
Used to start operations.
START
Control Panel
15