Changing Or Erasing The Multiple Logo - Panasonic UF-890/990 Operating Instructions Manual

Changing or Erasing the Multiple LOGO

If you have to change or erase any of the Multiple LOGOs, follow the steps below.
1
FUNCTION
2
SET
4
3
7 7
4
SET
5
Enter the LOGO number you wish to change or erase.
Ex:
1 2
6
CLEAR
then enter a new LOGO (See Note 1 and 2).
Ex:
P A N A F A X
or just go to step 7 to erase the LOGO.
7
SET
To return to standby, press
NOTE
1. If you make a mistake, use
CLEAR
2. Use
the department name following the default LOGO.
7
SET
(01 to 24)
SPACE
STOP
then re-enter the correct LOGO.
to copy the default LOGO which is set in the User Parameters. You can add
COPY
S A L E S
.
to move the cursor beyond the incorrect character, press
Multiple LOGO
SET MODE (1-6)
∨ ∧
ENTER NO. OR
FAX PARAMETER(01-99)
NO.=❚
77 LOGO/DEPT. CODE
2:MULTI-LOGO
MULTI-LOGO (01-24)
∨ ∧
ENTER NO. OR
LOGO/DEPT. NAME
12 PANASONIC SALES
LOGO/DEPT. NAME
12 ❚
LOGO/DEPT. NAME
13 ❚
109