Halftone
The Halftone setting is useful when sending photographs or illustrations with gray tones. Your machine is
preset to HALFTONE = Off. You can select either Fast or Quality mode.
Press
to:
HALFTONE
HALFTONE
HALFTONE = Off
Verification Stamp
The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each
successfully transmitted page with a small
Press
to:
STAMP
1. When you select HALFTONE, FAST or QUALITY, your machine will automatically select Fine
NOTE
Resolution.
2. When you store a document in memory, the Verification Stamp will stamp on the document if it
is successfully stored in memory. In this case the Verification Stamp is not a confirmation that
the document was successfully transmitted. If you wish to disable the use of the Verification
Stamp when storing document in memory, change the setting of Fax Parameter No. 28. (See
page 37)
3. To change the preset Verification Stamp position, change the setting of Fax Parameter No. 04.
(See page 36)
Basic Transmission Settings
FAST
FAST
QUALITY
QUALITY
HALFTONE
HALFTONE = Quality
mark.
STAMP
STAMP = Off
FAST
QUALITY
HALFTONE
HALFTONE = Fast
STAMP
STAMP = On
43