Receive To Memory; General Description; Setting The Rcv To Memory Password; Setting Rcv To Memory - Panasonic UF-890/990 Operating Instructions Manual

Receive To Memory

General Description

This feature is used to secure all received documents by storing them into the memory. To print out the
document from memory, the authorized operator must enter the correct password.

Setting the RCV To Memory Password

1
2
3
4
5

Setting RCV To Memory

1
2
3
4
NOTE
88
7
FUNCTION
SET
4
SET
3 7
Enter a 4-digit RCV to Memory Password.
Ex:
1 2 3 4
SET
STOP
8
FUNCTION
SET
5
2
SET
1. When the memory overflows, the machine will stop receiving and release the line. The
machine will not answer the next incoming call until there is space available in the memory.
2. We recommend that optional flash memory card is installed when this function is used. See
page 153 on Image Memory Capacity.
SET MODE (1-6)
∨ ∧
ENTER NO. OR
FAX PARAMETER(01-99)
NO.=❚
37 RCV TO MEMORY
❚❚❚❚
37 RCV TO MEMORY
1234
SELECT MODE (1-5)
∨ ∧
ENTER NO. OR
RCV TO MEMORY=OFF
1:OFF 2:ON 3:PRINT
RCV TO MEMORY=ON
1:OFF 2:ON 3:PRINT
MAR-12-2002 15:00
< RCV TO MEMORY >