Connecting The Telephone Line Cable And Power Cord - Panasonic UF-890/990 Operating Instructions Manual

Connecting the Telephone Line Cable and Power Cord

s Power Cord
Plug one end of the power cord into an ordinary 3 prong AC outlet and the other end into the receptacle on
the rear of the machine.
Warning: This apparatus must be properly grounded through an ordinary 3 prong AC outlet.
Do not break off the earth (ground) prong to fit a 2 prong outlet.
s Telephone Line Cable
Plug one end of the telephone line cable into the "RJ-11C" telephone jack supplied by the telephone
company and the other end into the LINE jack on the left side of the machine.
RJ-11C Telephone Jack
NOTE
22
1. Your machine uses little power and you should keep it ON at all times.
Power Cord (Included)
Telephone Line Cable (Included)