On-Hook Dialing - Panasonic UF-890/990 Operating Instructions Manual

Sending Documents
Voice Mode Transmission

On-Hook Dialing

For On-Hook Dialing, follow the steps below.
1
2
3
4
NOTE
56
Set document(s) face down.
MONITOR
You will hear dial tone through the monitor speaker.
Dial the telephone number from the keypad.
Ex:
5 5 5 1 2
When you hear a beep,
START
1. If you need a special access number to get an outside line, dial it first then press
enter a pause (represented by a "-") before dialing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press /").
TONE
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex: 9 PAUSE TONE 5551234
3 4
(represented by a "/").
ENTER STATION(S)
THEN PRESS START 00%
* MONITOR *
❚
* DIALING *
5551234❚
ON LINE * XMT *
PAUSE
to