Multi-Station Transmission (Broadcasting) - Panasonic DX-800 Fax Manual

Multi-Station Transmission (Broadcasting)

You can store the document(s) into memory and then send to multiple stations (up to 202 addresses) via
LAN.
1
Set document(s) face down.
2
Enter the email addresses by any combination of the
following methods:
• One-Touch Dialing
• Abbreviated Dialing
• Directory Search Dialing, press
email address is entered.
• Manual Number Dialing, press
station is entered (up to 70 addresses).
Ex:
Ex:
If you want to confirm the number of stations you have
entered, press
3
The document(s) is stored into memory with a file number.
Then connects to the LAN and starts sending the email
message.
1. If your machine sounds an alarm (pi-pi-pi) in Step 2 above, this indicates that the Dialer is Full
NOTE
(more than 70 full email addresses are entered or 70 transmission reservations including G3
communication have been already reserved).
2. If the transmission cannot be completed for any reason, the email may be returned
undelivered; otherwise no reply will be printed.
3. The unit will accept a combination of email addresses and PSTN dialing numbers.
4. Generally, LAN transmission to multiple destinations will be completed in a single transmission
to the SMTP server. However, when the "DELIVERY NOTICE=ON" or when using the
DIRECT IFAX XMT modes, separate transmission is required for each destination.
Sending Documents via LAN
1 0 0
.
SET
ENTER STATION(S)
THEN PRESS START 00%
after each
SET
after each
SET
<01>(Station name)
abc@panasonic.com❚
[100](Station name)
xyz@panasonic.com❚
ADD MORE OR START
* STORE *
* STORE * COMPLETED
TOTAL PAGE=005
ON LINE * MEM.MXT *
ID:abc@panasonic.com
2 STN(S) ARE SET
NO.001
PAGES=001 01%
25%
95