Installing Ic Carddriver (Usb-Driver) (Windows Xp); Installing Data Administrator Plugin For Ic Card Authentication Unit Au-201 - Olivetti d-COLOR MF652 User Manual

7

Installing IC CardDriver (USB-Driver) (Windows XP)

To use Data Administrator, set up the operating environment after configuring authentication settings of this
machine.
For setup, install the IC CardDriver (USB-Driver) of the authentication unit, then install Data Administrator
PlugIn for IC Card Authentication Unit AU-201.
0 Before setup, install Data Administrator V4.1.15000 or later in your computer. For details about instal-
lation, refer to the relevant Data Administrator manual.
0 To check the version of your Data Administrator, select the [Help] menu in Data Administrator, and
also select [Version Information] - [Plug-in version].
0 Administrator privileges are required to perform this task.
0 The latest IC CardDriver (USB-Driver) can be downloaded from our Web site.
1
Turn the Main Power Switch of this machine off, and disconnect the authentication unit from this ma-
chine.
2
Connect the authentication unit to the USB port of your computer.
The [Found New Hardware Wizard] dialog box appears.
% If the [Windows connect to Windows Update] screen appears, select [No, not this time], then click
[Next].
NOTICE
When connecting or disconnecting the USB cable, hold the plug. Otherwise, the machine may be dam-
aged or a failure may occur.
Do not connect another USB device to the same port as for the authentication unit. Doing so reduces
the USB power supply, resulting in an operation failure.
To use the USB hub, connect the self-power USB hub that supplies 500 mA or more.
3
Select [Install from a list or specific location (Advanced)], then click [Next].
4
Under [Search for the best driver in these locations.], select [Include this location in the search:], then
click [Browse].
5
Select the IC CardDriver (USB-Driver) file in the computer, then click [OK].
6
Click [Next], and perform the procedure by following the on-screen instructions.
7
When the installation completes, click [Finish].
Then, install Data Administrator PlugIn for IC Card Authentication Unit AU-201. Refer to page 7-12.

Installing Data Administrator PlugIn for IC Card Authentication Unit AU-201

0 The latest Data Administrator PlugIn can be downloaded from our Web site.
1
Click setup.exe of Data Administrator PlugIn.
2
When necessary, select the setup language, and click [OK].
3
Follow the on-screen instructions to proceed with the installation.
4
Click [Next].
5
Select [I accept the terms in the license agreement], and then click [Next].
6
Click [Install].
7
When the installation is complete, click [Finish].
This completes the installation of Data Administrator PlugIn for IC Card Authentication Unit
AU-201, which completes the setup.
7-12
Using Data Administrator (for the administrator) 7.4
d-Color MF752/652