Olivetti d-COLOR MF652 User Manual page 78

6
6
Place your finger on the authentication unit to scan the finger vein pattern.
% Place your finger straight so that your finger cushion lightly touches the hollow and protuberance
part of the scanning section.
% Scan a finger vein pattern three times. Place the same finger on the authentication unit again after
scanning just once, and press [Start Reading].
% After scanning the finger vein patterns, place the same finger, then click [Authentication Test]. If the
authentication test has succeeded, click [Register]. If the authentication test has failed, click [Reset]
to repeat the scanning process.
7
Click [OK], and register authentication information of the next user.
8
After the registration of authentication information has been completed for all users, click [Export to the
device].
% When necessary, select a user name, and click [Edit] to change registered information.
9
Click [Write].
% Data Administrator supports the batch copy function. When necessary, you can collectively write
the registered authentication information to multiple devices.
10
When writing to this machine has finished, click [OK].
11
Disconnect the authentication unit from the USB port of the computer.
NOTICE
When connecting or disconnecting the USB cable, hold the plug. Otherwise, the machine may be dam-
aged or a failure may occur.
12
Restart this machine.
NOTICE
When restarting this machine, turn the Main Power Switch off and on again after 10 or more seconds
have passed. Not doing so may cause an operation failure.
13
Connect the authentication unit to the USB Port of this machine.
6-16
Using Data Administrator (for the administrator) 6.5
d-Color MF752/652