Installing Biodriver (Usb-Driver) (Windows Vista) - Olivetti d-COLOR MF652 User Manual

6.5 Using Data Administrator (for the administrator)
12
When the installation is complete, click [Close].
Then, install Data Administrator PlugIn for Biometric Authentication Unit AU-102. Refer to
page 6-15.

Installing BioDriver (USB-Driver) (Windows Vista)

To use Data Administrator, set up the operating environment after configuring authentication settings of this
machine.
For setup, install the BioDriver (USB-Driver) of the authentication unit, then install Data Administrator
PlugIn for Biometric Authentication Unit AU-102.
0 Before setup, install Data Administrator V4.1.15000 or later in your computer. For details on installa-
tion, refer to the relevant Data Administrator manual.
0 To check the version of your Data Administrator, select the [Help] menu in Data Administrator, and
also select [Version Information] - [Plug-in version].
0 The latest BioDriver (USB-Driver) can be downloaded from our Web site.
1
Turn the Main Power Switch of this machine off, and disconnect the authentication unit from this ma-
chine.
2
Install BioDriver (USB-Driver).
% Connect the authentication unit to the USB port of your computer.
The [Found New Hardware] dialog box appears.
NOTICE
When connecting or disconnecting the USB cable, hold the plug. Otherwise, the machine may be dam-
aged or a failure may occur.
Do not connect another USB device to the same port as for the authentication unit. Doing so reduces
the USB power supply, resulting in an operation failure.
To use the USB hub, connect the self-power USB hub that supplies 500 mA or more.
3
Select [Locate and install driver software (recommended)].
4
Click [Browse my computer for driver software (advanced)].
5
Click [Browse...].
6
Select the BioDriver (USB-Driver) file in the computer, then click [OK].
7
Click [Next], and perform the procedure by following the on-screen instructions.
8
When the installation is complete, click [Close].
Then, install Data Administrator PlugIn for Biometric Authentication Unit AU-102. Refer to
page 6-15.
d-Color MF752/652
6
6-13