Introduction; Safety:warnings - Mira FORM Installation & User Manual

The Mira Form Thermostatic mixing valve is specified to meet the highest standards
of safety, comfort and economy as demanded by todays users. The Mira Form is
designed, manufactured and supported in accordance with accredited BS EN ISO
9001:1994 Quality Systems.
This Manual covers all Mira Form Thermostatic mixing valves manufactured from
March 2001.
The Mira Form Shower Valve is a thermostatic shower control with independent selection
for temperature and spray force and is suitable for connection to concealed pipework.
Mira Form Built-in, with 15 mm compression inlet/outlet connections. Supplied hot-
left, cold-right but can be reversed.
This Form Thermostatic Shower Control is precision engineered and should give
continued safe and controlled performance, provided:
1. It is installed, commissioned, operated and maintained in accordance with
manufacturers recommendations.
2. Periodic attention is given, when necessary, to maintain the product in good
functional order.
The function of a thermostatic mixing valve is to deliver water consistently at a safe
temperature. In keeping with every other mechanism, it cannot be considered as
functionally infallible and as such, cannot totally replace a supervisor's vigilance
where that is necessary. Provided it is installed, commissioned, operated and
maintained within manufacturers recommendations, the risk of failure, if not eliminated,
is reduced to the minimum achievable.
If you experience any difficulty with the installation or operation of your new shower
control, then please refer to 'Fault Diagnosis', before contacting Kohler Mira Limited.
Our telephone and fax numbers can be found on the back cover of this guide.

INTRODUCTION

SAFETY:WARNINGS

3