Maintenance - Mira FORM Installation & User Manual

General
1. The maintenance of this product must be carried out in accordance with instructions
given in this Manual, and must be conducted by designated, qualified and
competent personnel.
2. Mira products are precision-engineered and should give continued superior and
safe performance, provided:
- They are installed, commissioned, operated and maintained in accordance
with the recommendations stated in this Product Manual.
- Periodic attention is given as necessary to maintain the product and its associated
installation components in good functional order. Guidelines are given below.
3. The use of main supply-line or zone strainers (recommended maximum mesh
aperture dimension is 0.5 mm) will reduce the need to remove debris at each
mixing valve point.
The designed minimum service life of all cartridges used in Mira products is 5 years
providing the Mira Form is operated with the recommended operating conditions and
within the recommended operating parameters. However, when supply conditions
and/or usage patterns do not conform to the recommended operating parameters
and/or the recommended operating conditions, the cartridge and other critical parts
may need to be replaced more frequently ('recommended operating conditions' and
'recommended parameters' are defined in section: 'Specifications' under the headings
of 'Normal Operating Conditions' and 'Operating Parameters').

MAINTENANCE

29