Mira FORM Installation & User Manual page 33

Fitting the Concealing Plate Assembly
1. Fit the concealing plate to the valve
and secure with the temperature and
control knobs. Refer to section:
'Maintenance, Fitting the Knob
Assembly' for detailed instructions.
Note! If the wall surface or tiling is
uneven, the foam outer seal on the
concealing
supplementing with silicone sealant to
ensure a watertight seal.
2. Fit the wall clamp nut. Make sure that
the foam outlet seal is fitted between
the wall clamp nut to create a watertight
seal between the nut and the
concealing plate.
3. Fit the RAC to the wall clamp nut and
secure with the grubscrew. Make sure
that the 'O' seal is fitted to the wall
clamp nut.
4. Check that the control knobs rotate
fully and that the temperature and flow
controls operate correctly.
plate may need
33
Concealing
Plate
Foam
Outlet
Seal
'O' Seal
RAC
Wall Clamp
Nut
Grub Screw