Pentax K100D Service Manual page 4

(5) Copy the file of [kb393.bin] from [GM_FW] holder (For service) to SD cards.
[CAUTION] You should use latest firmware whenever creating the SD cards for updating.
* You should distinguish SD card by name label etc.
(6) Copy the file of [fwdc156b.bin] from [ＤＬ_FW] holder (For update) to SD cards
(7) Excute [Set up the VB run time] on next section
3. Set up the VB run time
If your computer is not installed "VisualBasic" software, set up the VB run time is required as follow.
It is not required if the VisualBasic is already installed before (*istDL2)
[Procedure]
① Set the 76700 adjustment program soft into the computer
② Execute the setup.exe in the folder of [vb6run_csx.x.x]
Install will start
* The Execute file and uninstall setting file will be generated
[Caution] The Execute file and setting file is needed when uninstall, therefore please do not delete it.
(To be continued next page)
76700 -3/94-