Connections - Panasonic KX-TG1840AL Operating Instructions Manual

TG1840AL(e-e).book Page 13 Tuesday, April 11, 2006 11:02 AM
Base unit display icons
Following icons appear on the base unit
display to indicate the current status of the
unit.
Display Meaning
icon
Answering system will
d
answer calls with a greeting
message and caller
message will not be
recorded. (page 56)
Ringer volume is off. (page
U
21)

Connections

When the AC adaptor is connected, a short
beep will be heard. If it is not heard, check
the connections.
(220–240 V, 50 Hz)
To telephone
network
Important:
L Use only the AC adaptor and telephone
line cord supplied with this unit.
Note:
L After connection, you must charge the
batteries to make or answer calls with the
handset (page 14).
L Never install telephone wiring during a
lightning storm.
L The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
Preparation
Hook
13