Answering Calls Using The Base Unit - Panasonic KX-TG1840AL Operating Instructions Manual

TG1840AL(e-e).book Page 21 Tuesday, April 11, 2006 11:02 AM
Note:
L The ringer volume cannot be adjusted if
the handset is on the base unit.
Answering calls using the
base unit
1
Press {s}.
2
When finished talking, press {s}.
To adjust the ringer volume
Press {>} or {<} when a call is received or
when the base unit is in standby mode. 4
volume levels (high/medium/low/off) are
available. To turn the ringer volume off,
press and hold {<} until the base unit
beeps. To turn the ringer volume on again,
press {>}.
Note:
L When the ringer volume is turned off, U is
displayed on the base unit.
L When the ringer volume is turned off, the
base unit will not ring for outside calls and
it will ring at the low level for intercom
calls.
L When the message alert feature is on
(page 57), the base unit will beep even if
the ringer volume is turned off.
To change ringtones
You can change the ringtone used by the
base unit.
1
Press {>} or {<} when the base unit is
in standby mode.
2
Press {<} or {>} repeatedly to
select the desired ringtone, then press
{5}.
Making/Answering Calls
21