Port Forwarding - Planet WNAP-6315 User Manual

5.5.4 Port Forwarding

Choose menu "Firewall  Port Forwarding", and you can configure to re-direct a particular range of service
port numbers from the Internet network to a particular LAN IP address. It helps users to host some servers
behind the firewall.
After the configuration, please click the "Apply Changes" button to save the settings.
The page includes the following fields:
Object
Enable Port Forwarding
IP Address
Protocol
Port Range
Comment
Check the "Select" box of which rule you want to delete, and then click the "Delete Selected" button to delete it.
Figure 5-6-1 Port Forwarding
Enable Port Forwarding function
Add LAN IP address of specified host or server on the private local network
Select the port number protocol type (TCP, UDP or both). If you are unsure,
then leave it to the default both protocol
Add ports you want to control. For TCP and UDP Services, enter the beginning
of the range of port numbers used by the service. If the service uses a single
port number, enter it in both the start and finish fields.
The description of this setting
User Manual of WNAP-6315
Description
-75-