Planet WNAP-6315 User Manual page 64

Authentication Mode
802.1x Authentication
 Disable:
Authentication is disabled and no password/key is required to connect to the access point.
 WEP:
WEP (Wired Equivalent Privacy) is a basic encryption. For a higher level of security consider using the WPA
encryption.
 WEP:
It is based on the IEEE 802.11 standard. And the default setting of
authentication is Automatic, which can select Open System or Shared Key
authentication type automatically based on the wireless station's capability
and request. Furthermore, you can select Key Length and enter 10 and 26
Hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not
promoted) or 5 and 13 ASCII characters in the Encryption Key field.
 WPA2:
WPA2 is a high level encryption and is supported by most wireless devices
and operating systems.
 WPA-Mixed:
WPA Mixed Mode allows the use of both WPA and WPA2 at the same time.
Enterprise (RADIUS)

When you select the authentication mode based on Enterprise (Radius
Server), please enter the IP Address, Port, and Password of the Radius
Server.
 Personal (Pre-Shared Key)
When you select the other authentication mode based on Personal
(Pre-Shared Key), please enter at least 8 ASCII characters (Passphrase) or
64 Hexadecimal characters. All of the Cipher Suites support TKIP and AES.
Enable 802.1x authentication function and then enter the IP Address, Port,
and Password of the Radius Server.
User Manual of WNAP-6315
-55-