WAN
VPN Passthrough
Operation Mode
Firewall
Wireless Mode
Max. SSID
Channel Width
Wireless Isolation
Encryption Type
Wireless Security
Max. Wireless Clients
Max. WDS APs
Max. Wired Clients
WMM
QoS
NTP
Self Healing
B/G Protection Mode
IAPP Roaming
Supports UPnP
Supports IGMP Proxy
Supports 802.1d STP (Spanning Tree)
Static IP
DHCP (Dynamic IP)
PPPoE
PPTP
L2TP
PPTP
L2TP
IPSec
IPv6
Gateway
Bridge
WISP
NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting virtual server and DMZ
Built-in firewall with port/ IP address/ MAC/ URL filtering
AP Bridge
AP Router
Client Bridge
Client Router (WISP)
WDS PtP
WDS PtMP
WDS Repeater
Universal Repeater (AP+Client)
Up to 5
20MHz / 40MHz
Enable to isolate each connected wireless client so that they cannot access
mutually
64/128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X
Wireless LAN ACL (Access Control List) filtering
Wireless MAC address filtering
Supports WPS (Wi-Fi Protected Setup )
Enable/Disable SSID Broadcast
20
8
253
Supports Wi-Fi multimedia
Supports Quality of Service for bandwidth control
Network Time Management
Supports Schedule Reboot
Supports protection mechanism to prevent collisions among 802.11b/g modes
Supports IAPP (Inter Access Point Protocol) roaming
User Manual of WNAP-6315
-6-