Port Forwarding - Planet WNRT-625G User Manual

Reset
Current Static Routing Table
Delete Selected
Delete All
Reset
After configuration complete, please click "Apply" button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press "Continue" for configure other
settings or "Apply" to restart WNRT-625G with new configuration. Please refer to section 4.2.7 for more
information about this screen.
5.6.2

Port Forwarding

The Port Forwarding allows you to re-direct a particular range of service port numbers (from the
Internet/WAN Ports) to a particular LAN IP address. It helps you to host some servers behind the
firewall.
Parameters
Enable Port Forwarding Enable Port Forwarding.
Private IP
Type
Click "Reset" will clear your current settings to allow you to enter again.
If you want to remove some Destination LAN IP address from the "Current
Static Routing Table", select the Destination LAN IP addresses you want to
remove in the table and then click "Delete Selected".
If you want remove all Destination LAN IP addresses from the table, just click
this button.
Click "Reset" will clear your current selections.
Description
This is the private IP of the server in LAN.
Note: You need to give your LAN PC clients a fixed/static IP address for Port
Forwarding to work properly.
This is the protocol type to be forwarded. You can choose to forward "TCP"
56