Port Forwarding - Planet WNRT-620 User Manual

Reset Click "Reset" will clear your current selections.
After configuration complete, please click "Apply" button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press "Continue" for configure other
settings or "Apply" to restart WNRT-620 with new configuration. Please refer to section 4.2.7 for more
information about this screen.
5.6.2

Port Forwarding

The Port Forwarding allows you to re-direct a particular range of service port numbers (from the
Internet/WAN Ports) to a particular LAN IP address. It helps you to host some servers behind the
firewall.
Parameters Description
Enable Port Forwarding Enable Port Forwarding.
This is the private IP of the server in LAN.
Private IP Note: You need to give your LAN PC clients a fixed/static IP address for Port
Forwarding to work properly.
This is the protocol type to be forwarded. You can choose to forward "TCP"
Type or "UDP" packets only or select "both" to forward both "TCP" and "UDP"
packets.
Port Range The range of ports to be forward to the private IP.
Comment The description of this setting.
Fill in the "Private IP", "Type", "Port Range" and "Comment" of the setting to
Add be added and then click "Add". Then this Port Forwarding setting will be
added into the "Current Port Forwarding Table" below. If you find any typo
- 45 -