Port Forwarding - Planet WNRT-625 User Manual

Click to add a configuration to the Current Static Routing Table at the bottom
Add
of this page.
Reset Click "Reset" will clear your current settings to allow you to enter again.
Current Static Routing Table
If you want to remove some Destination LAN IP address from the "Current
Delete Selected Static Routing Table", select the Destination LAN IP addresses you want to
remove in the table and then click "Delete Selected".
Delete All If you want remove all Destination LAN IP addresses from the table, just click
this button.
Reset Click "Reset" will clear your current selections.
After configuration complete, please click "Apply" button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press "Continue" for configure other
settings or "Apply" to restart WNRT-625 with new configuration. Please refer to section 4.2.7 for more
information about this screen.
5.6.2

Port Forwarding

The Port Forwarding allows you to re-direct a particular range of service port numbers (from the
Internet/WAN Ports) to a particular LAN IP address. It helps you to host some servers behind the
firewall.
Parameters Description
Enable Port Forwarding Enable Port Forwarding.
This is the private IP of the server in LAN.
Private IP
Note: You need to give your LAN PC clients a fixed/static IP address for Port
- 46 -