Planet WNAP-6315 User Manual page 75

The page includes the following fields:
Object
Enable WDS
MAC Address
Data Rate
Comment
Set Security
Show Statics
Current WDS AP List
Once clicked "Set Security" to enter the following page to configure the encryption method and pre-shared key
for the WDS connection.
WDS feature can only be implemented between 2 wireless devices that both support the
WDS feature. Plus, channel, security settings and security key must be the same on
both such devices.
Check the box to enable the WDS function. Please select WDS or
AP+WDS in the Mode of Wireless Basic Settings before you enable
WDS on this page.
You can enter the MAC address of the AP you want to connect with.
Default is "Auto".
You can make some comment for each MAC address on the list.
Click the "Set Security" button to configure the wireless security
parameters of the AP you want to connect via WDS.
Click the "Show Statics" button to show the WDS AP.
You can select some MAC addresses of the AP and click the "Delete
Selected" button to delete it.
Figure 5-47 WDS – Set Security
-66-
User Manual of WNAP-6315
Description