Pause; Refill Tanks - Graco Reactor E-10hp Instructions Manual

Pause

To bring the hose and gun back to spray temperature
after a brief break, use the following procedure.
1. Engage piston safety lock or trigger safety lock.
Fusion
2. Set function knob to Slow Recirc
2
1
0
+
-
3. Set Recirc/Spray valves to Recirc until temperature
readouts come back up.
4. If you stop spraying for more than 2 minutes when
using an impingement mix gun, close gun fluid
valves. Doing this will keep the internal parts of the
gun cleaner and prevent crossover.
Fusion
332144E
Probler
.
3
4
5
6
7
8
9
10
ti21494a
ti21495a
Probler

Refill Tanks

Material can be added to the tanks at any time. See Fill
Fluid Tanks, page 18.
NOTE: If you are operating at high temperatures or flow
rates, follow Pause instructions to bring tanks up to tem-
perature.
NOTICE
To prevent cross-contamination of fluids and equip-
ment parts, never interchange ISO and RES parts or
containers.
Have at least two 5 gal. (19 liter) pails to transfer fluid
from drums to supply tanks. Label one pail "ISO" and
the other "RES", using the red and blue labels pro-
vided. Always double-check which material you have
before pouring it in the supply tanks. Pouring is easier
if pails are not filled to the top.
Open only one supply tank at a time, to avoid splash-
ing material from one tank into the other when filling.
Pause
23